Modular Ramp
Model.:
SR-MR01
Ramp section length, cm: 122, 183, 244 & 305 section
Width: 81 cm
Weight capacity: 360 kg
Universal platform size cm: 122 x 122, 152 x 122 or 152 x 152
A wise investment, not a FIXED investment! You can remove and reinstall
the ramp in a new premise.
Designed to address the accessibility needs of the residential and light
commercial market, the EZ-ACCESS® Modular Ramp system is an ex-
cellent choice when accessibility needs extend beyond the scope of a
portable ramp. The ef fi cient design uses less hardware and no presum-
ably is required. EZ-ACCESS Modular Ramps offer quick and convenient
installation and removal. Made in the USA.
Advantages:
A 24 foot system can be installed, including handrails, in less than 30 minutes.
Made of durable, lightweight aluminium that does not rust, rot, or decay.
Ramps, platforms, and handrails require minimum assembly.
No anchoring into concrete footing or pads is required.
Architectural designed for a clean, modern appearance.
Can be easily expanded, re-con fi gured, or moved.
Permanent non-skid surface.
Sides are fi nished and fl ush; no hazardous nuts or bolts protruding
into usable ramp area.
available for
short term
hire
Universal Platform with
Handrail End Loops
Handrail Assembly
Inside Handrail
Corner Kit
Top Transition Plate
Platform Support Tubes
Ramp Section with
Handrail Assembly
Components of the Modular Ramp system
SF-1
SuitCASE Ramp
The Suitcase® Ramp Signature Series™ are ideal for both wheelchair and
scooter access to vehicles or into homes or buildings. These ramps are a
new design that features several innovative design enhancements. These
ramps have a no pinch non-protruding full-length live hinge making for
safe, silent and maintenance free operation. The non-breakable handles
are fl exible and offer a comfortable grip and convenient carrying. These
ramps have a enhanced extruded tread for superior traction that can be
self-adjusted to adapt to uneven ground.
Model
Usable Size
Fold Size
Weight
Load
Usage
SR-SC-SS2
61/76
61/38/10
4 kg
360
curbs/1 step
SR-SC-SS4
122/76
122/38/10
8 kg
360 curbs/1-2 steps
SR-SC-SS6
183/76
183/38/10
13.5 kg
360
1-3 steps/vans
SR-SC-SS8
243.5/76
243.5/38/10
19 kg
360
2-3 steps/vans
SR-SC-TLE
Top Lip Extension
8 Foot Suitcase Ramp is ideal for creating comfortable wheelchair access.
Suitcase Ramp with optional Top Lip Extension increases the standard 3" lip to
become 9". allowing the ramp to clear the rear bumber of vans and 4WD's.
Suitcase Ramps have been designed with superior traction.
Bottom transition plates
self-adjust to accomodate
uneven terrain.
SF-2
threshold Ramp
rubber threshold Ramp
The Threshhold Ramp is lightweight yet durable. This anodized aluminum
The Rubber Threshold Ramp can be simply placed against the door
ramp is designed for both indoor and outdoor use. The ramp is ideal for
threshold (either inside or outside) to provide a smooth ground-to-sill
doorways, sliding glass doors and raised landings. The componants
transition. If needed, the ramp can be trimmed for lower heights or the
are interchangeable, with 6 different height options, you choose the
Rubber Raiser (SR-THRISER-225) to reach greater heights. This ramp
ideal ramp for your needs. Each component is 86cm wide make it ideal
is slip-resistant and designed for years of continued use. The standard
for wheelchairs, walkers and cane users. Each component rises in 1"
Threshold Ramp is 2.5inchs (6.3 cms) in height. Using the Riser will
increments to a maximum 6" in height.
increase the ramp height to 4 and 3/4 inches (12 cms).
Model
Usable Size, inches
Total Weight
Max. Load
Model
Usable Size, inches
Total Weight
Max. Load
(H x L x W)
(H x L x W)
SR-TR-1
1/6.5/34
1.3 kg
272
SR-THR-250
2.5/24/48
18 kg
385
SR-TR-2
2/12/34
2.5 kg
272
SR-THRISER-225 2.25/24/24 (ea)
10.5 kg (ea)
385
SR-TR-3
3/17/34
3.6 kg
272
SR-TR-4
4/22/34
5 kg
272
SR-TR-5
5/27.5/34
6.8 kg
272
SR-TR-6
6/33/34
9 kg
272
Threshold Ramp is 48in wide
making it ideal for wheelchair
and walker access.
Threshold Ramp Size 2 makes small inconvenient
thresholds easy hurdles to climb.
Add the Risers to
increase the length
of the ramp by
24ins and increase
the height by an
extra 2.25ins.
Threshold Ramp Size 6 allows easy access to areas.
rubber threshold Ramp with bevelled sides
The Rubber Threshold Ramp with Bevelled Sides is available in 3.8cms
and 6.3cms heights. This ramp is a handy 91cms wide allowing the ramp
to be used with most doorways. The ramp is slip-resistant and can be
used on any surface.
Model
Usable Size, inches
Total Weight
Max. Load
(H x L x W)
SR-RT-150
1.5/14/36
6.3 kg
385
SR-RT-250
2.5/25/36
18 kg
385
SF-3
Rampboss Wheelchair Ramp
Protect your investment - This breakthrough designed ramp can be fi tted onto the tow
bar and is easily transferable to another vehicle. It can be used with a van; station wagon
or four-wheel drive vehicles. You can maintain the full potential value of your car when
you sell it without the hindrance of a permanently installed ramp.
Affordable - A very affordable option where power lifting is not required. It is a fraction
of the cost of powered lifters.
Space saving - It does not take up valuable space inside the vehicle.
Complies with Australian Standard - Designed according to Australian Standard AS/
1
NZ3856.1:1998 for Wheelchair Use, the Wheelchair Ramp provides a 2470 mm long, 800
mm wide non-slip surface with a 1:4 drop and 75 mm height edge. Loading an occupied
wheelchair or power wheelchair is easy.
Easy to operate - Folds and unfolds easily with gas strut and handles. The tow bar fi tting
eliminates the possibility of movement that a portable ramp usually experiences. The
in-built locking mechanism ensures the ramp does not open accidentally.
Heavy duty - Weight capacity of 300 kg allows loading of occupied manual or power
wheelchair.
Low maintenance -No need for welding, no complicated motor or hydraulics and/or power
connection. Virtually no on-going maintenance.
2
*Patent No. APP#PS0152 & 2003 10048.
*Complies with Engineering Standard AS/NZ S3856.1.
Order Information:
SRB200 Wheelchair Ramp, 2470 mm
long, gas-assist, side rails, 300kg.
SRB105 Scooter Ramp, 1900 mm long,
side rails, 200 kg.
3
CALL FAS FOR A
QUOTE
4
Ramp folds up and stays on the tow bar.
Ramp effortlessly folds down for loading in seconds
SFE500 Series Restraints System
Model.:
SFE500
(Step 1 to 4). Non-slip surface and 75 mm raised edge
ensures safe use. No gap between ramp and vehicle
The SFE 500 series restraints are the best in securement systems.
allows smooth transfer.
This system incorporates positive locking hardware that is quickly
and securely fastened and easily disconnected. Meets AS2942 1987.
With the option of fl oor Tracking or FloorPads, we can accomodate
any variety of mobility aids available. With safety and reliability
paramount, the Surelock SFE500 series restraints are the perfect
tie-down solution.
SFE500 series restraints system
is the perfect companion to the
The wheelchair can be tied down with
Rampboss wheelchair ramp.
SFE500 series restraints system in
the vehicle.
SF-4